ITW 4016874, Инструкция по установке и эксплуатации

Страница: 4 / 28

2 IQ POWER MPS POWER SUPPLY 5201279 Rev A
2. DESCRIPTION
Simco-Ion’s IQ Power MPS Static Neutralizing System consists of a high voltage
power supply, static neutralizing bar, and the following optional devices: control
station, and static sensing bar. The MPS is typically used in conjunction with the
LP bar. The IQ Power LP static bar features a low profile and plug-in style high
voltage connector that is compatible with other power supplies in the IQ Power line.
The IQ Power LP is a speed type static bar. The IQ Power Control Station provides
the ability to both monitor and control real time system performance. The IQ Easy
Static Sensor Bar enhances the Control Station’s ability to both monitor and control
the static eliminating performance of the MPS.
The high voltage power supply module provides microprocessor controlled high
voltage DC output to the static bar. The high voltage causes the ionizing pins on
the static bar to generate positive and negative ions. The electric field from the static
charge on the material being processed attracts opposite polarity ions from the static
bar causing the material to be neutralized. Excess ions will either recombine in air
or dissipate to ground.
The LP static neutralizing bar features current limiting at each individual ion
emitting pin to minimize the risk of hazardous electrical shock if the bar is touched
while in operation. This safety feature does not compromise the IQ Power system’s
ability to neutralize static charges. The emitter pins are made of tungsten to extend
the longevity and sharpness of the points, providing optimal performance of the
static bar.
The IQ Power MPS may be powered independently with an AC adapter or as part of
an IQ Power system from the Control Station. When part of an IQ Power system,
a pre-terminated cable with M12 connectors is used for connection to the Control
Station. These cables provide power and communication for the IQ Power MPS.
For details on these cables, contact Simco-Ion customer service (800) 203-3419
(refer to Section 8, Parts and Accessories).
The Control Station is a convenient hub that provides power and communication
for up to ten IQ Power or IQ Easy devices. The two-way digital communication
provided by the Control Station enables monitoring and logging of system
performance and allows access to enhanced features in the static neutralization
system. These enhanced features include; manual control of ionization balance,
Auto-Tune automatic control of ionization balance, and CLFB (Closed Loop Feed
Back) providing the ultimate in static eliminator control (use of the IQ Easy Static
Sensor Bar is required).
The Control Station may also be configured with a port for an Anybus® CompactCom
module. This module provides interface with a wide variety of standard industrial
computer communication protocols allowing easy integration of the IQ Power static
neutralizing system with existing networks.
Anybus® CompactCom is a registered trademark of HMS Industrial Networks.