Operation Manual - Hobart 2400 Compact – 120 / 140 / 180 kVA
Operator’s Instructions
Document no. 578.430AB
Page 36 of 75
•
After operation, the output(s) has to be turned off before removing the aircraft plug.
Press the Start/stop button
•
The aircraft cable(s) can now be safely removed from the aircraft and placed at the cable rest
position.
Note!
Please notice that the Start/Stop button
also functions as a Reset push button.
If, for some reason, the unit stops due to an error / failure, press the Start/Stop/Reset to reset the unit.
Default Display Screen Operating
OUTPUT ( I )
U
I
Phase A:
115.0 V < 20 A
Phase B:
115.0 V < 20 A
Phase C:
115.0 V < 20 A
Average:
115.0 V < 20 A
◄ Back ▼/▲ Next/Prev
POWER ( ∑ )
P
S
Phase A:
< 1 kW < 1 kVA
Phase B:
< 1 kW < 1 kVA
Phase C:
< 1 kW < 1 kVA
Sum:
< 3 kW < 3 kVA
◄ Back ▼/▲ Next/Prev
Use the ▼/▲ to browse through the various screens.
Use
◄
to leave the sub-menu and return to Default
Screen.
Note!
Parameters may vary depending on the mode of the unit
Standby / operating / load profile etc.
115.0 V <20 A
Output Activated
Ready For Use
<5 %
400 Hz II:
400 Hz I:
OUTPUT ( II ) U
I
Phase A:
0.0 V < 20 A
Phase B:
0.0 V < 20 A
Phase C:
0.0 V < 20 A
Average:
0.0 V < 20 A
◄ Back ▼/▲ Next/Prev
OM2252
Rev 0 December 15 2016
