ITT CA-BAYONET, Инструкции по сборке и подключению

Страница: 14 / 20

CANNON STANDARD
page 14 of 20
ASSEMBLY AND WIRING INSTRUCTION
CA-BAYONET IP69K
Circular Connector with Protection Class IP69K
CAS25092E
Bearbeitet: Geprüft: Norm: Änd.-Stand: Änd.-Datum:
AKU/FA AKU/FA G5820W JPE 18.12.2018
ITT Cannon GmbH, D-71384 Weinstadt
4

Move the cone ring on the shielding ring.

Mount the cone ring into position (snap-on connection).

Pay attention that the end of the cable jacket is closed to
the cone ring.
5

Cut the shielding braid according to picture, use a scissors
or wire cutter.
6

Move the cable sealing to the cone ring.

Lubricate the O-ring with petrolatum (jelly), Vaseline®
7

Move the endbell, housing to the barrel.
8

Screw the endbell, housing over the O-ring of the barrel
(finger tight).

TIPP: As installation support the flange shell can be used.

Move the cable grip into the endbell, housing. Pay
attention that the mounting direction is according to the
picture.
9

Lubricate the thread of the endbell housing.

Screw the coupling nut on the endbell, housing softly.
10

Tighten the endbell, housing and note the permitted
torque, see 5.1, table 1.

While tightening the endbell, take care that the cable is
secured against twisting.

TIPP: Use the mounting adapter or flange shell.