1
Pit lid with a pre-drilled hole
CFG-1601-001
2
Retainer clip
3
Retainer clip collar
User-supplied
4
OpenWay Riva water pit module
ERW-1601-001
Installing the module in the pit lid
1. Insert the retainer clip into the pit lid hole with the convex surface on the top of the pit lid.
2. From the bottom side of the lid, screw on the threaded retainer clip collar until the
beveled top rests against the pit lid.
Note
: Ensure the beveled edge of the clip collar is toward the top of the pit lid.
3. Align and insert the retainer clip tab (1) into the retainer clip receptacle (2) on the pit
module housing.
4. Verify the clip locks into place in the housing.
Installing the OpenWay Riva Water Pit Module
OpenWay Riva Pit Water Module Installation Guide TDC-1666-000
16
Proprietary and Confidential
