Caution:
Do not over tighten this, as doing so could damage the index housing or
the proving cable head.
Note:
The Intelis Gas Meter will automatically go into Test Mode (Menu 6) when the
pulse prover output cable is connected.
12. Start the proving test by clicking
RUN
on the SNAP prover.
13. Verify the LED blinks (pulses) when the air begins to flow through the meter.
08 July 2020
815-0154-00 REV 000
Itron, Inc. Page 30 of 66
Intelis Gas Meter Proving and Setup Guide
4 Proving the Intelis Gas Meter Using the Honeywell SNAP Proving
System