ITRON Intelis Скачать руководство пользователя страница 6

Страница: 6 / 66

Important Safety and Compliance Information

This section provides important information for your safety and product compliance.

USA, FCC Part 15 Spectrum Compliance

This device complies with Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

Operation is subject to the following two conditions:

■

This device may not cause harmful interference.

■

This device must accept any interference that may cause undesirable operation.

This device must be installed to provide a separation distance of at least 20 centimeters (7.9

inches) from all persons to be compliant with regulatory RF exposure.

USA, FCC Class B-Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

■

Reorient or relocate the receiving antenna.

■

Increase the separation between the equipment and receiver.

■

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■

Consult the dealer or an experienced radio or TV technician for help.

Modifications and Repairs

To ensure system performance, this device and antenna shall not be changed or modified

without the express approval of Itron. Per FCC rules, unapproved modifications or operation

beyond or in conflict with these instructions for use could void the user's authority to operate the

equipment.

08 July 2020

815-0154-00 REV 000

Itron, Inc. Page 6 of 66

Содержание Intelis



































































Результаты поиска

Содержание Intelis

Отзывы:

Похожие инструкции для Intelis

Бренды по названию

Популярные бренды

ITRON Intelis, Руководство по установке

Результаты поиска

Содержание Intelis

Отзывы:

Похожие инструкции для Intelis

Бренды по названию

Популярные бренды