ITR Hurricane Zephyr HW, Инструкция по установке и эксплуатации

Страница: 81 / 89

Section 11, Maintenance
11- 4 Installation Manual for Hurricane® Zephyr™ HW Heating System
MAINTENANCE ITEM MAINTENANCE
FREQUENCY SERVICE REQUIRED
Air/FUEL/WATER HOSES SEASONALLY INSPECT FOR LEAKS AND
WEAK POINTS
HOSE CLAMPS SEASONALLY INSPECT FOR CORROSION
TIGHTEN IF LOOSE
COMBUSTION CHAMBER
AND EXHAUST
1000 HOURS VACUUM CLEAN
FUEL FILTER SEASONALLY INSPECT FOR CLEANING
OR REPLACEMENT
NOZZLES
DISTRIBUTOR ORIFICE,
AIR SLOTS & O-RINGS
SEASONALLY OR
2000 HOURS CLEANING AND
INSPECTION FOR WEAR
AND DAMAGE
EXHAUST SYSTEM SEASONALLY INSPECT FOR LEAKS AND
CORROSION
COOLANT MIXTURE 36 MONTHS
11 MONTHS REPLACE
Ph LEVEL FOR ACIDITY
ELECTRONIC CONTROL
PANEL SEASONALLY VOLTAGE TEST / INSPECT
FOR CORRODED WIRES
AIR COMPRESSOR
FUEL PUMP
COMBUSTION FAN
MOTOR
SEASONALLY INSPECT FOR LEAKS,
CORROSION & WEAR
Figure 11-1 Maintenance Schedule
11.9 Protecting Hydronic Heating Systems
The advantage of closed hydronic heating systems is that as long
as there are no leaks, (i.e., no need for constant make-up
water), the fill neutralizes (that is, it reaches equilibrium). The
long-term result is minimal scale build-up and insignificant
corrosion since after operating for a period of time, most oxygen
has been "starved" out of the boiler fill water. While boiler fill
water treatments have their place, leak prevention is the single
most important preventative maintenance item.
Regular maintenance and prompt repair of leaks, combined with
a one-time application of appropriate inhibitors, can help you
enjoy problem-free heating. Since it is difficult to guarantee that
a hydronic heating system will never leak, corrosion inhibitors