ITR Hurricane Zephyr HW, Инструкция по установке и эксплуатации

Страница: 18 / 89

Section 2, Mounting the Heater Unit
2-4 Installation Manual for
Hurricane
® Zephyr™ HW Heating
2.3 What NOT TO DO
Don’t mount the heater without a direct connection to the
combustion fan from an outside air source.
Don’t mount the heater without exhaust fittings installed and the
exhaust directed outside the boat.
Don’t mount the heater in a location that restricts access to the
service panels or creates interference with the top mounted
connections.
2.4 Procedure
After choosing the mounting location for the heater unit:
1. Mount the unit horizontally
2. Secure the heater in place (against the wall, floor or a
mounting platform) using the (2) supplied mounting brackets
that are bolted to the heater (using the existing bolts) on
each side of the bottom tray of the heater. The brackets are
fastened to the mounting surface using 1/4” through bolts or
wood screws with 1” diameter fender washers, lock washers
and nuts. (see fig. 2-2)
Figure 2-2: Heater Mounting Bracket Configuration