HANITO
USER´S MANUAL
Page -11-
5.1.2. Test completion
After this test is finished, the first zero in the weight display (Fig. 4) appears after activating the zero
figure; this indicating that the dynamometer is ready for weighing.
CAUTION!: The dynamometer is provided with automatic zeroing which uses the load suspended from
the hook when operation is started as a dead weight. This requires that the device has no load
suspended when it is started, since the load will automatically be considered as net weight.
Fig. 4 - 0 kg
5.1.3. Stop
To switch off the dynamometer, press the " O " (OFF) button (Fig. 2)
5.1.4. Start-up with a weight
If you start the weighing system with a load suspended, it must be removed; this will cause a negative
sign to appear on the left side of the display (Fig. 5), meaning that the weight is below ZERO.
