Itho Daalderop WPU 5G 25 c, Руководство пользователя

Страница: 44 / 50

11.3. Thermostat Factory Settings
It may be necessary to reset the thermostat to restore
factory settings.
The thermostat settings erased by the reset are:
●
the temperature setting ;
●
the connection with the ventilation unit.
The following settings are stored in the heat pump and
remain active:
●
the TIME/DATE settings .;
●
the TAP WATER START setting.
Resetting your thermostat is done as follows:
a) Thermostat reset can only start within 2 minutes of
the batteries being fitted in the thermostat.
If necessary, refit the batteries!
b) Activate the thermostat within two minutes, press
the LOGO and hold it down (about 5 seconds) until the
VENTILATION, TEMPERATURE and HOUSE symbols
are displayed on the screen.
Flashing symbols/parts are not paired.
Continuously lit symbols/parts are connected.
c) Press the lower-right corner of the screen (TAP
WATER COMFORT button) for about 5 seconds until
your thermostat restarts
ä
Caution!
The TAP WATER COMFORT button is not visible to
prevent accidental resetting.
d) The thermostat has been reset to factory settings.
e) Restore the lost settings and wireless connections.
44