Itho Daalderop WPU 5G 25 c, Руководство пользователя, Страница: 20 / 50

5.3.1. Automatic heating/cooling
By default, the heat pump system will automatically heat
or cool based on the temperature you set. After heating, it
takes at least 24 hours for the system to cool.
5.3.2. Electric heating
By switching on the ELECTRIC HEATING setting, the heat
pump will increase temperature faster in the event of
failure, or to increase comfort. After activating this
setting, the electrical element will switch on for 24 hours,
when necessary, for the additional heating of the home.
After 24 hours, the electrical additional heating switches
off automatically.
The ELECTRIC HEATING setting will result in a higher
energy consumption, which will result in a higher energy
bill.
If ELECTRIC HEATING is turned on, you'll see the letters
EE every two seconds at the place of the desired room
temperature.
For example:
5.3.3. Stand-by
It is possible to turn off the thermostat's temperature
demand (
HEATING or COOLING ) indefinitely, for example
during your holiday. To do this, the thermostat must be
set to STANDBY mode.
Although the thermostat's temperature demand is
switched off, the temperature in the home is continuously
monitored so that it doesn't get too cold or too hot. During
the STAND-BY setting, the house is not heated above 18°C
or cooled below 21°C.
ä
Caution!
After switching off STAND-BY mode, the heat pump
system takes some time to get the house back to its
set temperature.
If necessary, use the ELECTRIC HEATING setting to
reach the desired temperature faster.
If your thermostat is in STAND-BY mode, you'll see two
gray dashes at the place of the desired room
temperature.
For example:
20