Itho Daalderop WPU 5G 25 c, Руководство пользователя

Страница: 22 / 50

6.3. Start time heating tap water
Tap water start
Tap water comfort
The supply of hot water is heated once a day to about
58°C. You can set the start time yourself. This means you
will always have enough hot water at the most suitable
time.
Get start time
You can view the set start time as follows:
a) Activate the thermostat.
b) Press the
TAP WATER COMFORT button .
c) Press the TAP WATER START button.
d) The set start time appears on the screen.
e) The thermostat will automatically return to the
operating status once it is not used for 10 seconds.
Set start time
The required heating time depends on the size of the
storage tank and the type of heat pump.
Warm-up time (hours:minutes)
WPU 5G WPV 90 WPV 150 WPV 200 WPV 270
25 / 35 1:50 3:00 3:55 5:15
45 1:30 2:25 3:10 4:10
55 1:15 2:00 2:35 3:25
65 1:05 1:40 2:15 2:55
75 0:50 1:30 1:45 2:20
Adjusting the start time is done as follows:
a) Activate the thermostat.
b) Press the TAP WATER COMFORT button .
c) Hold down the TAP WATER START button for about 3
seconds until the start time is shown flashing.
If, during the set-up, the thermostat is not used for 10
seconds, the thermostat will return to operating status. The
settings entered until that moment will be saved.
d) Hours.
The hour can be set by briefly pressing the
INCREASE or REDUCE button.
Confirm the setting by pressing the LOGO . The
thermostat moves to the next setting.
e) Minutes.
The minutes can be set by briefly pressing the
INCREASE or REDUCE button.
Confirm the setting by pressing the LOGO . The time
is now set.
f) For confirmation, the time is displayed for 3 seconds.
g) The thermostat will then automatically return to the
operating status.
22