Itho Daalderop Smartboiler Mono, Инструкция по установке и использованию

Страница: 28 / 38

7.1.3. Locking
●
The LED indicator flashes quickly in red.
●
Locking is indicated in the operational status by a code starting
with the letter E.
e1
Code Icon Description
E0 — Hardware error
E1 — Hardware error
E2 — Hardware error
E3 — Hardware error
E4 — Hardware error
E5 — Hardware error
E6 — Hardware error
E7 — Hardware error
E8 — Software error
E9 — Hardware error
E10 — Overload protection
E11 — Temperature sensor error
E12 — Hardware error
E13 — Hardware error
E14 — Software error
E15 — Heater selection error
E20 — Boiling dry
E24 — Blocking continues for too long
E25 — Temperature sensor error
E26 — Temperature sensor error
E27 — Temperature sensor error
E28 — Temperature sensor error
E29 — Temperature sensor error
E30 — Temperature sensor error
E31 — Temperature sensor error
E32 — Temperature sensor error
●
The appliance is no longer in operation and all functions are
disabled.
●
Try to resolve a lock by resetting the error message; see Reset
error message on page 28.
ä
Caution!
If the appliance remains in an error state or the same error
occurs repeatedly, contact your installer or service organisation.
7.2. Reset error message
An error message can be reset in one of two ways:
1. In the event of an error notification in the operational status,
press the Back button for approximately five seconds. The LED
indicator flashes green twice in confirmation.
2. Using ERROR RESET in the SERVICE service menu.
An ERROR RESET of the appliance means that:
●
The error message history is deleted;
●
The heater restarts in STANDBY mode. Go to the
CONFIGURATION settings to change the heater mode to ON.
28