ITech IT6000B Series, Руководство пользователя

Страница: 194 / 309

Basic Operation
The IT6000B series power system supports multiple instruments to work in par-
allel mode to provide more power and current output capability. ( Load mode)
Parallel instruments can actively average current.
Configure the Menu Item
1. Press the composite keys [Shift]+[P-set] (System) on the front panel to en-
ter the system menu.
2. Press the Up/Down key or turn the knob to select the Parallel and press
[Enter] .
3. Press the Left / Right key or turn the knob to adjust the value of this
parameter.
•
Single: Default value, indicates that the instrument is in single mode.
•
Master: Indicates that the current single unit is set to master in parallel
mode. When set to Master , you also need to set the number of slaves to
be mounted for the master, so you need to set the value of the Total pa-
rameter. For example, setting Total = 3 means that the total number of
units in the parallel relationship is 3.
In the parallel mode, you only need to operate the master. Synchro-
nous operations on other slaves are implemented by operating the
master.
•
Slave: Indicates that the instrument is set to the slave in parallel mode.
4. After the parameter settings are complete, press [Enter] .
Set the Parallel Mode
•
Before connecting the system bus, you must ensure that each in-
strument is in single mode (Single).
•
Fiber optic cables cannot be flexed or folded. When the cable is too
long and needs to be arranged, gently wrap the cable in a circle and
gently tie it.
Copyright © Itech Electronic Co., Ltd.
182