ITC TRIANGLE WATERQUIP MULTIFERTIC MF, Руководство пользователя

Страница: 8 / 26

5.- INSTALLATION
GENERALITIES
To install this pump it is advisable to choose places protected from water, away
from heat sources and with renovation of air.
Place the pump vertically over a totally horizontal rigid surface to achieve a
proper lubrication of all inner elements. Anticipate which will be the room you
will need to comfortably do the basic maintenance and install/desinstall the
pump.
Tack the pump to the provided stand, and the stand to the choseN even
surface. The special stainless steel stand has eight holes in its upper part for
fastening the dosing pump, of which four will be used. In the one and three
module pumps the four side holes are used, and in the two and four module
middle holes are used. (See drawing).
ELECTRIC CONECTION
9
The electric protection of the motor must be installed and adjusted
following its nominal intensity (overloaded switch disjuntor). (See
wiring)
A disconnection dispositive must be installed in case of emergency.
The equipment must be protected to avoid untimely sudden starts.