ITC TRIANGLE WATERQUIP MULTIFERTIC MF, Руководство пользователя

Страница: 3 / 26

4
1.- GENERAL DESCRIPTION
MULTIFERTIC MF dosing pumps are heavy duty, high precission electric
piston pumps for dosing liquid products.
They are made up of one driving module and 1 to 4 injection modules for 25 to
300 l/h. Injection modules consist of one 50, 100, 200, 300, or 500 l/h piston
for
MULTIFERTIC MF injectors of series MF2, and of one 25, 50, 100, 150,300
l/h for the MULTIFERTIC MF injectors of series MF1, independently regulated
by means of a system of POSITIVE RETURN, exclusive to I.T.C.
In the same injector can be connected several injection modules to apportion
different products
(INDEPENDENT INJECTION) or to increase the injection
flow. The design of this dosing pump allows the combination of MF piston
modules with MFD diaphragm modules in the same pump. By increasing the
number of modules in the same injector, a higher flow regularity is obtained,
whereby in the 4 module model an actually continuous flow is obtained.
Injection modules may be connected in the factory or added later when the
injector is in place.
MULTIFERTIC MF dosing pumps are manufactured with materials that can
resist the existing agrochemical products, even acids. It is designed for all sorts
of processes where it is necessary to dose a product into a hydraulic network,
such as: food, textile, chemical industry, water treatments, etc. (See materials
in Technical Features). In case there is any doubt about compatibility of
materials with the products to be used please contact with ITC S.L. Technical
Service.
Dosing flow of each module is adjustable independently with no need to stop
It is made up as follows:
Motor
Cylinder
Motor module
Additional module
Support
Regulator
Motor block