ITC STS10, Руководство оператора

Страница: 5 / 22

FRANÇAIS
ENGLISH
ENGLISH
FRANÇAIS
FRANÇAIS
ENGLISH
ENGLISH
FRANÇAIS
v.081126
FUNCTIONAL DESCRIPTION
A Stand up wheels
B Transport handle
C Drain plug
D Water tank
E Parallel guide
F 45 degree angle guide
G 45 degree bevel guide
H Belt cover
I Shaft lock button
J Circuit breaker
K On/Off switch
L Switch box
M 2.5 HP motor
N Blade irrigation nozzle
O Blade guard lock knob
P Blade guard
Q 10” continuous rim diamond saw blade
R Water pump
S Rubber-padded sliding table
T Folded-position lock knob
U Folded-position lock plate
V Rear folding leg
W Front folding leg
X Leg brace lock knob
Y Folded transport wheels
Z Cut depth lock knob
ASSEMBLY
n
Some parts of the 10" Sliding Tile Saw may already be assembled in the
carton, rendering some of the assembly instructions below redundant.
n
For shipping, the legs are locked in the folded position with slots in the
Folded-position lock plate ( U in Functional Description, above ) engaging a
pin on each leg.
STAND
1. Loosen the Folded-position lock knob s ( T in Functional Description,
above
).
2. Swing the Folded-position lock plate up into its horizontal storage position,
releasing the leg pins.
3. Tighten the Folded-position lock knob s to hold the plate in it horizontal
position.
4. Unfold the legs.
5. Tighten the Leg brace lock knob s ( X in Functional Description, above ) to
hold the legs erect.
WARNING: Stand maximum weight: 68 kg (150 lb.) Be sure stand is tight,
secure and on a level surface before using.
!