Italkero Fiammella, Руководство по установке

Страница: 17 / 40

Outside grill assemblage (cod 7000000350)
To assemble the grill you only need the inserts, and
the steeliness steel flange.
Assemblage SDP protection (cod 7000000365)
The assembling is execute in the following way:
-After you have drilled on the outside wall put the
protection with mortar
-Assemblage the terminal tube with the equipment
screws
-Adapt the terminal to the tube length and grill pro-
tection between the walls.
The tube cuts have to be perpendicular being real
careful do not deform.
Kit parallel tube Ø 54 mm with unique terminal
(standard)
This kind of system is used when the unloaded fume
and the intake of air are next to the apparatus.
Assemblage the adapter tubes connection uni-
que terminal, from the out side.
-Insert in the wall the assembled group adapter con-
nection, angles, and curves.
Position the unloaded/intake tubes at thread outside
wall, being real careful that the short tube is always
up (unloaded tube)
-Fasten the group adepter connection to the templa-
te with the screw set.
-Insert the unique terminal until the plastic ring tou-
ches the wall.
-Mark with a punch the holes for the fastening
-Cut the terminal then make the hole for the inserts
Ø 6 mm
-Fasten the unique terminal to the wall using the
inserts Ø 6mm seeing that the unloaded tube is
toward up.
Ascertain that the adapter tubes connections
are correctly inserted. To fasten the tubes
assemblage, use silicone grease and verified that
the O-ring don’t come out from there seating.
Before you wall up the tubes, provide to insulate the
exhaust fume tube with material resistant to the 200°
C° (ex. HT/-Armaflex)
17 INSTALLER
Ø 54
SDP
GP
Ø 54