Italkero Eco SC Series, Установка и послепродажное обслуживание

Страница: 33 / 40

33 INSTALLER
FAULT CAUSE SOLUTION
Gas valve closed Check/replace
- Faulty valve
The pilot doesn’t light up
Check / switch /replace
- Improperly set electrode gap
- Selector knob set to incorrect position
- Dirty pilot injector
The appliance does not start
(does not run)
The appliance starts
(malfunction/shutdown)
Injectors not suited to the gas type Use the proper injectors
The pilot does not stay on
Check / switch /replace
- Thermocouple failure
- Dirty pilot injector
Uneven gas pressure Set the proper pressures
Room temperature greater than
programmed value
Set room thermostat to 7
Air in the gas line Purge the pipes
Burned fuse Replace
Dirty injectors Clean the injectors
Timer has not effect, not working
Segments out of position Adjust the segments
Mains power disconnected Check the power supply
Function switch in the wrong position Set to timer
Power switch set to OFF Reset and program the timer