Italian Gelato ICETEAM EASY MIX 120 PLUS, Инструкция по эксплуатации

Страница: 22 / 39

- 22 -
EASY MIX PLUS
Easy Mix Plus - 2018/07 - Rev. 03
EN
Beating – Heating – Manual Cooling button
Upon pressing the
Beating
button in Stop mode, the following menu is displayed:
* BEATING
HEATING
and the Beating,
Decrease
and
Increase LEDs light up
.
The user may select the desired function using the
Increase
and
Decrease
buttons
(an asterisk appears next to the selected function).
Press the
AUTO
button
STOP
easymix 60
plus
to start the desired manual program.
BEATING
:
BEATING
Timer 29:59 +21° 04
The display shows:
- the current function on the first line;
- the timer countdown on the left on the second line and the temperature of the
product inside hopper in the middle and the speed on the right;
In this function, the beating is activated for 30’. When the timer elapses the machine
emits a sound signal and goes back into Stop mode.
HEATING:
Upon selection of the Heating function, by pressing the
AUTO
button
STOP
easymix 60
plus
a
second menu is displayed, which allows the user to select the type of heating
based on the product quantity in the hopper. By using the Increase and Decrease
buttons select now one of the following:
* 120 - 60 Full Filling
60 - 40 Half Filling
The display shows:
MIX ADDED?
The cycle starts upon pressing the
AUTO
button again.
The machine starts to heat the product and the display shall be as follows:
HEATING
+85°C +68°C
- the current function on the first line;
- on the second line: the set temperature on the left, the product temperature on
the right, and the temperature curve in the middle.
The temperature to be reached (set temperature) can be edited with the Increase/
Decrease buttons (relevant LED's are on) from 10°C to 90°C.
BEATING is always active when heating is activated.
Once the set temperature has been reached the heating is deactivated, while the
beater continues to operate and the buzzer rings intermittently for a few seconds.
At this stage the product is thermostat-controlled indefinitely.
After a few minutes (see the “Timer Backlight” user programming step) the display
backlighting is switched off.
STOP
easymix 60
plus