Italian Gelato ICETEAM EASY MIX 120 PLUS, Инструкция по эксплуатации

Страница: 17 / 39

EASY MIX PLUS
- 17 - Easy Mix Plus - 2018/07 - Rev. 03
EN
3. INSTRUCTIONS FOR USE
3.1 MACHINE SAFETY WARNINGS
When using industrial equipment and plants, one must be aware of the fact that moving parts
(rotary motion), high voltage components, as well as parts subject to high temperatures may cause
serious damage to persons and things.
The persons in charge of safety must ensure that:
-
an incorrect use or handling shall be avoided;
-
the safety devices are neither removed nor tampered with;
-
the machine is regularly serviced;
-
only original spare parts are used, especially in the case of safety-related components
(ex.: protection microswitches, thermostats);
-
suitable personal protective equipment is used;
-
high care must be paid during hot product cycling.
To achieve the above, the following is necessary:
-
at the work station an instruction manual relevant to the machine should be available;
-
such documentation must be carefully read and the instructions must be strictly followed;
-
only adequately skilled personnel should be assigned to electrical equipment and machineries;
this appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety;
- Make sure that no technician will ever carry out interventions outside his/her own knowledge
and responsibility sphere;
- Children should be supervised to ensure that they do not play with the appliance.
3.2 MACHINE CONFIGURATION
The machine consists of a motor for beater assembly, a heating and cooling system with air-cooled
or water-cooled condenser.
The product is prepared by pouring a mix into the hopper and starting the production cycle, while
referring to minimum and maximum quantities reported in the table in paragraph 1.2.2.
When the cycle ends, the product can be extracted using the special spigot.
WARNING
In any case, do not touch the spigot door during the heating stage or the stages
immediately after, since it can reach very high temperatures.
WARNING
Be very careful during the processing/extraction of hot products – coming into
contact with the product could cause burns.