Use and Maintenance manual
20
CHAP.5 – MAINTENANCE
WARNING: Before carrying out any maintenance operations make sure that the machine has
been disconnected from the main electrical supply.
Read the instructions given here carefully, following them step by step.
5.1 Standard maintenance
5.1.1 Cleaning the oven
INTERNAL CHAMBER
- Build up of grease or other food residue inside the oven can constitute a fire hazard and so
particular attention must be paid when cleaning the inside of the oven.
Use a metal brush with a long enough handle to brush the decks throughout the day. Use a soft
bristtle brush to get the particles out. Usea scrapper for caked-on particles. NEVER use water.
- No harsh cleaning agents or acid substances must be used on the coating inside the chamber but
you can
use a damp cloth
.
EXTERNAL GLASS
-
All
Front Glass except the Control Panel must be taken off and cleaned
once a month
.
Don’t use
chemical agent for cleaning the glass.
Clean the stainless surfaces behind the glass.
- Be very careful not to clean and/or wet the tempered glass door while still hot as the sudden
drop of temperature could cause it to fracture.
COMPONENTS
-
Weekly
,
clean the air vents on the panels and check that the smoke/vapour outlet is working
efficiently.
- When cleaning the outside of the oven take special care when cleaning around the controls. Not
to allow water to come in contact with the electrical components or to filter through inside the
oven frame.
STAND and WHEELS
-
Brush the wheels on regular basis
- Not to use any acid substance for cleaning the stand and the
wheels.
INTERNAL PRO
OF
ER
- No harsh cleaning agents or acid substances must be used on the coating inside the pro
of
er
but use a damp cloth instead.
- Dry carefully the parts subject to cleaning for preventing any rust.
HOOD’S GRILL
- When cleaning the hood’s grill take special care when cleaning around the controls. Not to allow
water to come in contact with the electrical components or to filter through inside the oven
frame.
The grid must be removed and the motor must be inspected
every 6 months
to prevent possible
blockage
