Use and Maintenance manual
13
DECREMENT key
-
Is used to decrease the value selected and to turn off the buzzer.
-
With code entry function: by pressing once it is possible to enter the second digit of the
code.
ENTER key
-
With the card Off: by pressing continuously for 10 seconds it is possible to enable parameter
programming.
-
With the card in standby: by pressing once it is possible to enable cycle execution.
-
With the cycle in progress: by pressing once it is possible to stop the cycle execution.
HUMIDITY key
-
With the card in standby: by pressing once it is possible to enable/disable the humidity .
-
With the cycle in progress: by pressing once it is possible to enable/disable the humidity.
-
If the humidity is enabled: by pressing continuously for three seconds it is possible to enable
viewing the humidity temperatures.
-
With the card Off: by pressing continuously for three seconds it is possible to enable code
entry for reloading all the default parameters.
-
With code entry function: by pressing once it is possible to enter the first digit of the code.
STEAM key
-
With program setting on: by pressing once it is possible to enable cyclic injection.
-
With cyclic injection setting: by pressing once it is possible to move from setting the on time
to the off time and exiting the setting.
-
With the steamer enabled: it is possible to inject steam in the chamber for the length of time
it is pressed if the steamer is up to temperature.
DISPLAY
DISPLAY
DESCRIZIONE
DS1
Ceiling display
DS2
Time display
DS3
Base display
DS4
Program display
Time display
-
With the card off it shows the current time.
-
With the cooking cycle in progress it shows the time remaining to the end of the cycle.
-
With program setting in progress it shows the length of time set for the cycle
Ceiling display
-
With the card in standby it shows the temperature of the top element.
-
With the cooking cycle in progress it shows the temperature of the top element.
-
With cycle setting in progress it shows the set-point for the top element.
-
With weekly programming in progress it shows the day of the week.
