Use and Maintenance manual
15
Pressing the ON/OFF key turns the card on. When it is on the TIME display shows the length of the
program, the TOP ELEMENT display shows the temperature of ceiling, the BOTTOM ELEMENT
display shows the temperature of the baseand the NPROG display shows the program number.
The ON/OFF Led is on, the TOP ELEMENT and BOTTOM ELEMENT Leds are off, while the HUMIDITY
Led and the LIGHT Led can be on if, respectively, the humidity and the light have been activated
using the corresponding keys.
Pressing the ENTER key activates the cycle and the ON/OFF Led flashes.
Pressing the ON/OFF key continuously for three seconds turns the card Off
MANUAL CYCLE SETTING
With the card on, press PROG to select manual cycle setting. The PROG display shows the program
number, press the INCREMENT and/or DECREMENT keys to select the dash that indicates the
manual program.
Now by pressing one of the keys TIME, CELING or BASE ELEMENTS the user can program the
manual cooking cycle using the INCREMENT and DECREMENT keys to set the value of the
respective function selected. In particular:
-
By pressing the TIME key the user can set the length of the cooking time. During the
programming phase the dot on the right of the TIME display flashes.
-
By pressing the CELING key the user can enter the temperature setpoint for the top elements.
During the programming phase the dot on the right of the CELING display flashes.
-
By pressing the BASE key the user can enter the temperature setpoint for the bottom
elements. During the programming phase the dot on the right of the BASE display flashes.
-
By pressing the HUMIDITY key the user can program the humidity activation/deactivation.
This programming phase ends by pressing the PROG key or after a timeout given by the P8
parameter. The values set are saved to memory and the next time the card is turned on the
manual program will have new values.
The values set can be changed while the cycle is running. This function is activated by holding
down for three seconds one of the keys TIME, CEILING ELEMENTS or BASE ELEMENTT in order to
select the value to be changed. The INCREMENT and DECREMENT keys are used to change the
value and it is saved by pressing the PROG key.
Every change made during the manual cooking cycle is memorised.
If the power is cut off for any reason, the manual cycle resumes keeping the humidity on if it was
activated.
ENTERING AND MEMORISING PROGRAMS
With the card on, press PROG to select entering N. 9 programs. The PROG display shows the
program number, press the INCREMENT and/or DECREMENT keys to select the number of the
program to be entered.
Now by pressing one of the keys TIME, CELING or BASE ELEMENT the user can program the
manual cooking cycle by using the INCREMENT and DECREMENT keys to set the value of the
respective function selected. More specifically:
-
By pressing the TIME key the user can set the length of the cooking cycle. During the
programming phase the dot to the right of the TIME display flashes.
-
By pressing the CELING key the user can set the temperature setpoint for the top elements.
During the programming phase the dot to the right of the CELING display flashes.
-
By pressing the BASE key the user can set the temperature setpoint for the bottom elements.
During the programming phase the dot to the right of the BASE display flashes.
