Use and Maintenance manual
17
Pressing the TIME key enables changing the program activation time, the part of the display for
the hours flashes, use the INCREMENT and DECREMENT keys to change the value. The next time
the TIME key is pressed the minutes can be changed, the part of the display for the minutes
flashes, use the INCREMENT and DECREMENT keys to change the value.
Pressing the BASE key enables program selection, use the INCREMENT and DECREMENT keys to
change the value.
Pressing the PROG key for three seconds will save the settings made.
Pressing the CEILING key and moving on to another day before saving the settings will lose the
settings.
This phase can be exited by pressing PROG or after a timeout of 10 seconds.
STARTING A COOKING CYCLE
When the card is on press the PROG key to select the program required with the INCREMENT and
DECREMENT keys. Pressing the ENTER key starts executing the cycle. The cooking in progress is
signalled by the ON/OFF Led flashing.
During the cycle the TIME display shows the time as a countdown, the CEILING and BASE displays
show respectively the temperatures of the top elements and of the bottom elements, the PROG
display shows the number of the program currently running.
To quickly see the setpoint regulating the top heating elements, just press the CEILING key, the
CEILING display will show the top element setpoint for as long as the key is held down. To quickly
see the setpoint regulating the bottom heating elements, just press the BASE key, the BASE
display will show the bottom element setpoint for as long as the key is held down.
Pressing the TIME key allows the view of the TIME display to be changed from the cycle time to
the current one. To return to displaying the cycle time press TIME.
See paragraph ERROR for the details of how to make settings.
When the time set for the cycle finishes, the buzzer sounds for the amount of time set with
parameter P13, and can be turned off by pressing the DECREMENT key. Thermostat control
continues until the ENTER key is pressed.
The values set for a cycle can be changed while it is running. To change the cycle time hold down
the TIME key for three seconds, the dot on the right of the TIME display will flash and use the
INCREMENT and DECREMENT keys to proceed with the alteration.
To change the setpoint for regulating the top elements, hold down the CEILING button for three
seconds, the dot on the right of the CEILING display will flash, then use the INCREMENT and
DECREMENT keys to proceed with the alteration.
To change the setpoint for regulating the bottom elements, hold down the BASE button for three
seconds, the dot on the right of the BASE display will flash, then use the INCREMENT and
DECREMENT keys to proceed with the alteration.
The edited values are saved to memory once the timeout set with the parameter P8 expires or by
pressing the PROG key. While entering, the new value is immediately available for regulation even
if it has not yet been saved to memory.
It is not possible to change the program number while the cycle is running.
ACTIVATING WEEKLY PROGRAMMING
Weekly programming is enabled/disabled by the P12 parameter
If a weekly program has been entered it is carried out automatically by turning the card off.
When the current time and date are the same as those entered then oven pre-heating is activated
and if the program selected involves automatic injection then the humidity also comes on. TIME
display shows the timer with the 2 central dots fixed lighted on. By pressing the ENTER bottom
the countdown is enabled ( the central dots of the TIME display flash) and the automatic injection
