iSystem IC57163, Руководство пользователя

Страница: 13 / 24

ERF8 DAP 22-pin Converter
Ordering code IAPIN10SAM22TRICORE
If your target features a 22-pin Samtec ERF8 target debug connector with the 22-pin ERF8
Aurix target pinout instead of 10-pin 1.27 mm Infineon DAP/DAPE connector, use iSYSTEM
ERF8 22-pin Converter, which acts as a pinout converter. The converter must be ordered
separately.
Converter pinout on the target side:
Signal
Direction
Signal
Description
Signal Pin Pin Signal Signal
Description
Signal
Direction
Not Connected NC 1 2 Vref Reference
Voltage
I
Not Connected NC 3 4 DAP0 DAP Clock O
Ground GND 5 6 DAP1 DAP Data pin I/O
Not Connected NC 7 8 NC Not Connected
Not Connected NC 9 10 DAP2 Optional 2nd
Data pin
I/O
Ground GND 11 12 nTRST JTAG O
Not Connected NC 13 14 NC Not Connected
Not Connected NC 15 16 NC Not Connected
Ground GND 17 18 NC Not Connected
Not Connected NC 19 20 NC Not Connected
Not Connected NC 21 22 RESET Reset I/O
22-pin ERF8 AURIX target pinout
Signal Direction is described from the BlueBox perspective.