iSystem IC57163, Руководство пользователя

Страница: 12 / 24

MEDC17 DAP 10-pin 1.27mm Converter
Ordering code IADAP10MEDC17
The MEDC17 converter and the pinout has been defined by Bosch.
Converter is connected at the end of the 10-pin 1.27mm Infineon DAP2 Wide D. Adapter
(Ordering code IC50163-2) or
Infineon DAP/DAPE Active Probe (Ordering code IC57163)
acting as a pinout converter and is available for TriCore embedded targets featuring the
MEDC17 10-pin 1.27mm target debug connector. The adapter must be ordered separately.
The following pinout is valid on the target side:
Signal
Direction
Signal
Description
Signal Pin Pin Signal
Signal
Description
Signal
Direction
1 2
Ground GND 3 4 DAP0 DAP clock O
I/O DAP Data pin DAP1 5 6
I/O
Power on
Reset
nRESET 7 8 nTRST/DAPEN Optional 3rd
Data pin
I/O
I/O
Reference
Voltage
Vref 9 10 DAP2
Optional 2nd
Data pin
I/O
10-pin MEDC17 target pinout
Signal Direction is described from the BlueBox perspective.
The pin next to the alignment pin is pin 10 and not pin 1!
Pin is marked with a number 1 directly on the converter target connector.
The converter connects to the target via a 10-pin 1.27mm connector, Samtec SFM-105-02-L-D-
A. A target should feature a matching part, for example Samtec TFM-105-02-L-D.