iSystem IC57163, Руководство пользователя

Страница: 19 / 24

Further Active Probe Settings
The iC5700 is capable of connecting to AURIX™ target devices through:
·
Its installed DTM module and an appropriate DAP cable adapter, e.g. 10-pin 1.27mm
Infineon DAP2 Wide D. Adapter, ordering code IC50163-2 or
This debug system has limited maximum DAP frequency and the DAPE debug port is not
supported. Alternatively, JTAG debug interface support is also available through a dedicated
JTAG cable adapter, e.g. IC50160.
·
Infineon DAP/DAPE Active Probe or
·
Infineon AGBT Active Probe
In order to switch from the default DTM interface and use to the Active Probe:
1. Click Refresh in Hardware menu / Options / FNet / Currently connected FNodes.
2. Click Create configurations for connected FNodes. Selected device is displayed in FNode
configurations
.
Configuration is created. Look for:
· Listed devices with Matched FNode
· Y (for yes) under Matched config
· List of available networks