iSys iTerra Elite ll, Руководство пользователя

Страница: 5 / 43

June 2011: Revision 002
5
4. Safety Information
120 Volt Models
Your iSys product has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment,
there are a few basic precautions you should take to avoid hurting yourself or damaging the product.

Save all provided documentation for future reference.
 
Read and follow all warning and instruction labels on the product itself.

Unplug the product before you clean it. Use only a damp cloth; do not use liquid or aerosol cleaners.

Place your product on a firm, solid surface. If placed on something unsteady, it may fall and be damaged. If
placed on a soft surface, the vents may be blocked, causing the product to overheat.

Protect your product from overheating. Make sure no obstructions block the openings of the product. Do not put
the product on or near a heat source (such as a radiator or heat register). Keep the product out of direct
sunlight.

Always use this product in a well ventilated area. Allow enough room around the product for adequate
ventilation and easy access to the paper trays. If the product is placed in any kind of enclosure, make sure the
enclosure is well ventilated.

Do not use the product near water. Do not spill liquid of any kind on it.

Be certain that your power source matches the rating listed on the back of the product. If you are not sure,
check with your dealer or local power company.

Do not connect this product to an uninterruptible power supply (UPS).

Your product has a grounded, three-prong plug as a safety feature. This plug only fits into a grounded outlet. If
the plug does not fit, the outlet may be an older, non-grounded type. Contact an electrician to have the outlet
replaced. Do not use an adapter to defeat the grounding.

Install the product near an easily accessible power outlet.

Avoid damaging the power cord. Do not put anything on it or place it where it will be walked on. If the cord
becomes damaged or frayed, replace it immediately.

If you are using an extension cord or power bar with the product, make sure the total amperes required by all
the equipment on the extension is less than the extension’s rating. The total ratings of all equipment plugged
into the outlet should not exceed 15 amperes.

Do not poke anything in the ventilation slots of the product. You could get an electrical shock or cause
hazardous electrical arcing, which could cause a fire.

Aside from the routine maintenance described in the documentation, do not try to service the product yourself.
Removing the cover may expose you to shocks or other hazards.

Do not make any adjustments other than those outlined in the documentation. You may cause damage that will
require extensive repair work. The provided documentation explains how to get your product serviced by
qualified iSys technicians. If anything happens that indicating your product is not working properly or has been
damaged, unplug it immediately and follow the procedures in the provided documentation for having your
product serviced.
Here are some of the things to look for.

The power cord or plug is frayed or damaged.

Liquid has been spilled into the product, or the product has been exposed to water.

The product has been dropped, or the cabinet is damaged.

The product does not function normally when following the operating instructions.