June 2011: Revision 002
15
How to Change the Settings: User
It should be noted that many of these settings can be, and often are, overridden by settings in the Windows printer drivers.
However, several of the driver settings can be left at “Printer Setting”, which will then default to the settings entered in
these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “standby,” the printer’s LCD window will show “Ready to Print”. In this
condition, to enter the menu system, press the up and down Menu buttons on the operator panel to move up and down
through the list of menus until the menu you wish to view is displayed. Then proceed as follows:
1.
Press
Enter
to enter the menu.
2.
Use the
up
and
down
MENU buttons on the control panel to scroll through the menus. When the item you want to
change is displayed, press
Enter
to view the sub-menus for that item.
3.
Use the
up
and
down
MENU buttons to move up and down through the sub-menu items. When the item you want to
change is displayed press Enter to display the setting.
4.
Use the
up
and
down
MENU buttons to move up and down through the available settings for the sub-menu item. When
the item you want to change is displayed press
Enter
to display the setting. An asterisk (*) will appear next to the setting,
indicating that this setting is currently in effect.
5.
Do one of the following:
•
Press
Back
again to move up to the list of menus;
or…
•
Press
On Line
or
Cancel
to exit from the menu system and return to standby.
How to Change the Settings: Administrator
You can set whether to
ENABLE
or
DISABLE
each category in the user menu.
Disabled categories are not displayed in the User’s menu. Only a system administrator can change these settings.
1. Turn
OFF
the printer. Turn
ON
the printer while pressing the
Enter
button.
When
Boot Menu
appears, take your finger off the button.
2.
Press the
Enter
button.
3.
At the Enter Password prompt, enter the 4-9 digit Admin password:
(a) Using the up and down MENU buttons, scroll to the required letter/digit.
(b) Press the Enter button to input and move to the next letter/digit.
(c) Repeat steps (a) and (b) until all letters/digits are entered.
Enter your 4 to 9 digit password.
(The default password is aaaaaa).
4.
Press the
Enter
button.
5.
Press the
up
or
down
MENU
button until the “category” you want to change is displayed.
6.
Press the
Enter
button.
7.
Press the
up
or
down
MENU
button until the “item” you want to change is displayed.
8.
Press the
Enter
button.
9.
Using the
up
or
down
MENU button, identify the parameter as required.
10.
Press the
Enter
button to enter an asterisk (*) on the right side of the setting selected.
11.
Press the
On Line
button to switch to online. The machine will automatically re-boot.
Содержание iTerra Elite ll
Страница 1: ...iTerra Elite ll User Guide ...
Страница 6: ...June 2011 Revision 002 6 ...
Страница 7: ...June 2011 Revision 002 7 ...
