29/108
G.83.0098 - Release 8.1.0 CH 2014
ista International GmbH - Grugaplatz 2 - 45131 Essen
http://www.ista.com
Parameterizing loop
* The user must ensure that they enter meaningful values
only. There is no plausibility check so that ‘wrong’ values
can also be accepted (e.g. month > 12).
Setting date and time
Devices with power pack or newly connected battery may
possibly start directly in the setup menu for date and time.
Resolution of the display
The number of decimal places of a value depends on the
chosen measurement section and the chosen dimension.
Pulse duration in ms (for "fast pulses")
Display
Meaning
Resetting the error message F8 (only
displayed when F8 present)
Resetting the maxima
Resetting the off times and flow mea-
suring time
Entry of the annual reference date
(DD.MM)*
Entry of the monthly reference date
(DD)*
Entry of the date (DD.MM.YY)*
Entry of the time (hh.mm.ss)*
Entry of the owner number, eight digit
(also MBus secondary address)
Entry of the M-Bus primary address for
module 1 (0..255)
Entry of the M-Bus primary address for
module 2 (0..255)
Select the first module function for
module 1 (CE or C2)
Select the second module function for
module 1 (CV, CT or RI)
Select the first module function for
module 2 (CE or C2)
Select the second module function for
module 2 (CV, CT or RI)
Select the maxima measuring period
(7.5 - 15 - 30 - 60 min:
3 - 6 -12 - 24 h)
Return to normal operation
Display
Meaning
NOTICE
►
The functions for modules 1 and 2 are of-
fered even if no or any other module is
plugged in. In this way the meter can be pa-
rameterised before the modules are in-
stalled.
NOTICE
►
Any ongoing parameterisation can be
aborted by pressing the service key again
("Escape function"). The last valid value will
show unchanged in this case.
Display
Meaning
Enter date
Enter time
Return to normal operation
