1.2 Safety Instructions
INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
4
iSmartGate-01W
www.
v2fe
.com
The electrical installation of the iSmartgate-01W should be done by a professional.
Please read carefully all these instrucions before installing and starting to use iSmartgate.
Please follow all the instructions in detail in order to avoid personal injuries or
damage to third party devices.
The iSmartgate-01W is not adequate for really sensible installations or to control very
precise processes, as either a WI-FI / Ethernet network failure or a power failure can not
guarante a secure control.
The iSmartgate-01W must not be used in any place where it can be in touch with
explosive material or medical applications.
ATTENTION
The smartphone needs to be connected via WI-FI to the same network where the iSmartgate-01W is.
(See section 6. iSmartgate App configuration).
Once the network device is configured with this two steps:
· connected to the gate
· our telephone connected to Wi-Fi to the same LAN as the router
(with the parameters configured properly)
By opening the application on your smartphone you’ll can open or close the door garage.
All settings can be made in a very simple way without specific knowledge of any programming language or PC.
NOTE
VIRTUAL TO FACTUAL ELECTRONICS, S.L. will never be responsible for any possible injury or damage
to people or objects that may occur due to an incorrect use or by not following these instructions.
Additionally, VIRTUAL TO FACTUAL ELECTRONICS S.L. will not accept any responsibility for third
party apps using it, or for any use of the iSmartgate-01W or its application, which is not specified
in this manual.
ATTENTION
ATTENTION
ATTENTION