INSTALLATION MANUAL · iSmartGate 01W ·
English / REV.3
22
iSmartGate-01W
www.
v2fe
.com
The default iSmartgate-01W's IP broadcast address is “
192.168.1.255”.
If you need to change it, please follow these steps:
1.
Press #1 until the display shows the following text: "
5- IPcast
"
2.
Press OK (button #3)
3.
The display message will ask you if you are sure you want to change the door's network port.
Press OK (button #3).
4.
As you press OK, the existing IP broadcast number will appear on the display. You will have to change the
IP broadcast number one character at a time. The character flashing is the one you can change, pushing the
CANCEL button (button #2). To move on to the next character, press SEL button (button #1).
5.
As soon has you have the first number defined, press OK (button #3).
6.
Now, the second number of the IP broadcast will appear on the display. Follow the same action than in step 4.
7.
As soon as you have the second number defined, press OK (button #3).
8.
Now, the third number of the IP broadcast will appear on the display.
Follow the same action you have done in steps 4 and 6.
9.
As soon has you have the third number defined, press OK (button #3).
10.
Now, the fourth number of the IP broadcast will appear on the display. Repeat the same process
you have done to change the other numbers.
11.
As soon has you have the fourth number defined, press OK (button #3).
NOTE
The default configuration of the iSmartgate-01W is the following:
· GATE NAME:
"home" (lowercase)
·
PASSWORD:
"12345678"
·
PORT:
"8001"
·
Ipbroadcast:
"192.168.1.255"
· MODE:
"Garage"
