iseg CC23 Скачать руководство пользователя страница 5

Страница: 5 / 44

Important safety instructions

DANGER!

DANGER!

This device is part of a high voltage supplying systems.
High voltages are dangerous and may be fatal.

USE CAUTION WHILE WORKING WITH THIS EQUIPMENT.
BE AWARE OF ELECTRICAL HAZARDS.

Always follow at the minimum these provisions:

•

High voltages must always be grounded

•

Do not touch wiring or connectors without securing

•

Never remove covers or equipment

•

Always observe humidity conditions

•

Service must be done by qualified personnel only

WARNING

WARNING!

RAMP DOWN VOLTAGES !
Before insertion or removal of crate controller, please make sure, that all voltages are ramped down, crates are
switched off and power cord is disconnected.

WARNING!

WARNING!

Do not operate the unit if you suspect the unit or the connected equipment to be damaged.

CAUTION!

CAUTION!

When installing the units, make sure that an air flow through the corresponding air inlet and outlet openings is
possible.

CAUTION!

CAUTION!

When controlling, with software, the high voltage systems, make sure that nobody is near the high voltage or
can be injured.

INFORMATION

INFORMATION

Please check the compatibility with the devices used.

Crate Controller CC24/CC23 | Last change on: 14.04.2020 |

www.iseg-hv.com

5/44

Содержание CC23













































Результаты поиска

Содержание CC23

Отзывы:

Похожие инструкции для CC23

Бренды по названию

Популярные бренды

iseg CC23, Техническая документация инструкция

Результаты поиска

Содержание CC23

Отзывы:

Похожие инструкции для CC23

Бренды по названию

Популярные бренды