Normal front panel operation
Hold the
POWER ON
pushbutton for one second. The power supply will be switched on. LED STATUS turns to GREEN. By holding
the
POWER ON
pushbutton again for one second, the power supply will be switched off. The LED STATUS goes OFF.
INFORMATION
INFORMATION
If the
POWER ON
pushbutton will be hold for five seconds, the crate enters the bitrate configuration mode
(see
10.Module Bitrate Configuration
)!
Front panel operation with errors
If an error occurs while trying to switch the Crate on, the LED STATUS lights RED for 5 seconds. After that the crate controller
shuts down the operation and the LED STATUS goes OFF. If an error occurs during operation, the crate remains powered on and
the LED STATUS is permanent RED.
All possible errors are described in the Crate Controller Status register description (see 15 Accessories
).
Crate Controller CC24/CC23 | Last change on: 14.04.2020 |
www.iseg-hv.com
14/44
