11.6. iCScontrol – control and monitor web application
The user interface of iCScontrol software is divided into three bars.
11.6.1.
Left bar: Hardware Explorer
The left column shows the configured hardware.
If connected with iseg CAN line management (starting with CC23) slaves are shown in yellow or green background, corresponding
to the CAN line they are connected with. Every device has a colored left border showing the running state.
Crate/Device running states
grey
one of the nested modules is ramping to the desired voltage
yellow
one channel of one of the nested channels is ramping to the desired voltage
red
the crate / device (or one of the nested modules/channels) has one or more errors (refer to the
error/event badges)
green
the crate / device (and all of the nested modules) are in a good condition, at least one channel of a nested
module is running high voltage
Module running states
grey
not present, not connected or switched off
yellow
one channel of the module is ramping to the desired voltage
red
the module has one or more errors (refer to the error/event badges)
green
the device/module is in a good condition, at least one channel is running high voltage
Crate Controller CC24/CC23 | Last change on: 14.04.2020 |
www.iseg-hv.com
34/44
