iDS6
Series User’s Manual
iS5 Communications Inc.
25
5.1.3.2
Port Profile
Port Profile interface
The following table describes the Port Profile interface page.
Label
Description
Port
Select a port (1-4) to see the settings.
Local TCP Port
Enter the Local TCP Port.
Command Port
Enter the Command Port.
Flush Data Buffer
After
Enter the amount of time that the received data will be queued in
the buffer. If the buffer is full (4K Bytes) or if all Delimiters are
reached before the time specified the data will be sent. The time
can be set from 0 to 65535 seconds.
Delimiter(Hex 0-
ff)
The received data will be queued in the buffer until all the delimiters
are reached. Up to 4 delimiters (00-FF, Hex) can be set. If the buffer
is full (4K Bytes) or if “Flush Data Buffer After” timeout is reached
before the Delimiters are met, the data will be sent.
Apply
Click “Apply” to activate the configurations.
