iDS6
Series User’s Manual
iS5 Communications Inc.
21
IP Configuration interface
The following table describes the labels in IP configuration interface page.
Label
Description
IP Configuration
Select from the following type of IP:
Static
DHCP/BOOTP
PPPoE
IP Address
Assign the IP address that the network is using. If DHCP client function
is enabled, there is no need to assign an IP address. The network
DHCP server will assign the IP address for the switch and it will be
displayed in this column. The default IP address is 192.168.10.2.
Netmask
Set the subnet mask to communicate on the network. If the DHCP
client function is enabled, a Netmask is not needed.
Gateway
Assign the network gateway for the switch. The default gateway is
192.168.10.254. If the DHCP client function is enabled, a Gateway is
not needed.
DNS1
Assign the primary DNS IP address . If the DHCP client function is
enabled, a DNS is not needed.
DNS2
Assign the secondary DNS IP address . If the DHCP client function is
enabled, a DNS is not needed.
Auto Report to IP
The Device Server will report its status periodically. Enter the IP
address where the report is to be sent.
Auto Report to
TCP Port
The Device Server will report its status periodically. Enter the TCP Port
where the report is to be sent.
