I.R.
GENERAL DESCRIPTION
The DTR-1000 is a multi-channel transmitter / receiver u
data + Ethernet fibre optic transmission link on a single fibre for 3G
to SMPTE standards 424M, 292M and 259M
In addition, the links may be used for ASI transport streams for use with MPEG compressed video streams or other
270 Mb/s type data.
For bi-directional data communication the optional external optical port can be connected to the SFP port on an
external Ethernet switch, via a single mode Gigabit SFP or 10 Gigabit SFP+ transceiver operating at 1410nm on one
side of the link and 1390nm on the other.
The optical port uses an internal course wave division multiplexer (CWDM) unit to combine the individual signals
together allowing up to almost 50Gb of data to be transmitted over a single fibre.
Monitoring is possible locally via the front panel display or remotely via a web browser.
Power is supplied by an internal AC input power supply
for power supply redundancy (external power pack
The DTR-1000 is designed to be operated as a transmit/receive pair and
transmitter only; a 16-channel receiver only; a
+ 4-channel transmitter; an 8-channel transmitter + 8
transmitter; an 8-channel transmitter only; an 8
receiver; or a 4-channel re 4
The DTR-1000 comes as a 1RU enclosed chassis with all signal and power connections on the rear.
Standard Features:
•
Transports up to 16 independent 3G
1000/100/10Mb/s Ethernet signal on a single fibre
•
Path lengths up to 2
•
DTR-1000 available as either 16 Tx; 16 Rx; 12
8 Rx; 4 Tx + 4 Rx; or 4 Rx + 4 Tx
•
Secondary DC supply inputs for power supply redundancy.
•
Web Browser monitoring and control
NOTE 1
Rated at 21dB path loss, though t
I.R.T. Communications Pty Ltd | www.irtcommunications.com
Page 5 of 19
channel transmitter / receiver unit designed principally for use as an up to sixteen serial
data + Ethernet fibre optic transmission link on a single fibre for 3G-SDI, HD-SDI or SD-SDI applications conforming
to SMPTE standards 424M, 292M and 259M-C using 9/125 μm single mode fibre.
addition, the links may be used for ASI transport streams for use with MPEG compressed video streams or other
directional data communication the optional external optical port can be connected to the SFP port on an
rnet switch, via a single mode Gigabit SFP or 10 Gigabit SFP+ transceiver operating at 1410nm on one
side of the link and 1390nm on the other.
The optical port uses an internal course wave division multiplexer (CWDM) unit to combine the individual signals
together allowing up to almost 50Gb of data to be transmitted over a single fibre.
Monitoring is possible locally via the front panel display or remotely via a web browser.
Power is supplied by an internal AC input power supply, with two secondary ex12Vdc input ports provided
for power supply redundancy (external power packs sold separately).
1000 is designed to be operated as a transmit/receive pair and is orderable as either a 16
channel receiver only; a 12-channel trans 4-channel receiver; a
channel transmitter + 8-channel receiver; an 8-channel
channel transmitter only; an 8-channel receiver only; a 4-channe
er + 4-channel transmitter. All models come with the bi-directional Ethernet port.
1000 comes as a 1RU enclosed chassis with all signal and power connections on the rear.
Transports up to 16 independent 3G-SDI, HD-SDI, SD-SDI or ASI signal rates plus
1000/100/10Mb/s Ethernet signal on a single fibre.
Path lengths up to 26 dB
1
optical path loss using 9/125μm single mode fibre
1000 available as either 16 Tx; 16 Rx; 12 Tx + 4 Rx; 12 Rx + 4 Tx; 8 Tx + 8 Rx;
; or 4 Rx + 4 Tx models.
supply inputs for power supply redundancy.
Web Browser monitoring and control.
, though typically > 24dB at 3G & > 26dB at HD and SD. Fitted with APD detectors.
DTR-1000
Revision 00
nit designed principally for use as an up to sixteen serial
SDI applications conforming
addition, the links may be used for ASI transport streams for use with MPEG compressed video streams or other
directional data communication the optional external optical port can be connected to the SFP port on an
rnet switch, via a single mode Gigabit SFP or 10 Gigabit SFP+ transceiver operating at 1410nm on one
The optical port uses an internal course wave division multiplexer (CWDM) unit to combine the individual signals
rnal +12Vdc input ports provided
is orderable as either a 16-channel
channel receiver; a 12-channel receiver
channel receiver + 8-channel
l transmitter + 4-channel
directional Ethernet port.
1000 comes as a 1RU enclosed chassis with all signal and power connections on the rear.
SDI or ASI signal rates plus a
optical path loss using 9/125μm single mode fibre.
x; 8 Tx + 8 Rx; 8 Rx + 8 Tx; 8 Tx;
Fitted with APD detectors.
