Ironwood FX 750 | User Manual
8
3.3 Inspection
Save all containers and packing materials until you are satisfied
that your machine has arrived in good condition. If you discover the
machine is damaged after you’ve signed for delivery, immediately
call Stiles Customer Service.
When you are completely satisfied with the condition of your
equipment, you should inventory its parts.
Open and check the contents of all containers to ensure all tools,
hardware, and accessories are included. The tool kit should contain
the following items:
1. 6-piece open end wrench set
2. T-wrench for fence with adjustable supporting bar
3. Spanner wrench for spindle retaining nut
4. 1
1
⁄
4
" spindle nut wrench
5. 1
1
⁄
4
" x 6" (152mm) spindle set with safety nut
6. 7-piece Allen wrench set
7. Grease gun
8. Cabinet handle key for locking/unlocking cabinet access door
9. Handwheel
10. Paint (2-color set)
3.4 Move Machine to Final Position
Be sure the site is properly prepared. Refer to section 2.0 for details.
Be sure the front access door is closed and locked
before transporting.
TOOLS REQUIRED:
• Hand truck or fork lift
Use a hand truck or fork-lift to move the machine on its pallet to
its final location. If using a fork lift, make sure fork travel is clear of
any obstacles.
Use a hand
truck or fork
lift to move
the machine.
3.5 Remove Machine from Pallet
Caution
The FX 750 weighs 1,040 pounds. For this procedure, we
recommend using four people.
TOOLS REQUIRED:
• Adjustable wrench
• Access door key
Carefully remove the machine from the pallet.
1. Remove the two bolts that secure the fence assembly.
2. Remove the fence assembly.
3. From inside the cabinet, remove the four
1
⁄
2
" (13mm) bolts that
secure the machine to the pallet at the interior corners.
4. Lift the machine from the pallet by one of 2 methods:
a. Team lift
b. Slide machine onto forks of fork lift
5. Carefully slide the machine into final position.
3.6 Level
TOOLS REQUIRED:
• Bubble Level
• Adjustable wrench
Use a bubble level along the length and width of the tabletop surface
to check for level. Use an adjustable wrench to adjust leveling bolts
to level machine.
Be sure to level
the machine.
