Ironwood FX 750 | User Manual
5
1.6 Safety Considerations
For your safety, read these instructions thoroughly before you install
and operate this machine. Always have these instructions available
at the machine for reference.
Observe all codes and regulations that apply to the installation and
operation of this machine.
Keep visitors at a safe distance from the workspace.
Keep children away from this and all machines. Childproof your
work area!
Familiarize yourself with the safety notices used in this manual.
Caution
If cautions are ignored, personal injury and/or machine damage
may result.
WaRninG
If warnings are ignored, serious injury or death may result.
Warning Labels
This machine has warning labels attached to ensure safe operation.
These warning labels are very important and should be kept clean
and never be removed. If warning labels become damaged or lost,
contact Stiles Machinery immediately for replacements.
Label 1 Safety rules and features
Label 2 Do not touch turning spindle or cutters
Label 3 Always wear eye and ear protection
Label 4 Optimum speed range
Label 5 Hazardous voltage
Label 6 Belt placement/speed diagram (inside access door)
Label 7 Spindle lock
Label 8 CE marking regulations
WaRninG
Never use the FX 750 for purposes other than its intended use. Do
not modify or remove any guards or other safety features. Improper
use or modifications may affect your warranty or result in serious
injury or death.
Training
This machine is intended for use by authorized, well-trained
operators only.
Do not operate this machine until you have a complete working
knowledge of this shaper and have been properly trained for its
safe operation, correct adjustment and use. All operators should
thoroughly read and understand this manual and the workings of
this machine prior to operation.
It is essential that all operators be aware of the following:
• The dangers associated with the operation of this machine.
• The use of personal protective equipment for ear and
eye protection.
• The proper positioning of the operator and operator hands
relative to the cutters.
• The principles of machine operation, proper use and adjustment
of the fence, jigs, safety guards templates, extension tables and
end stops.
• The correct selection of tools and the associated spindle speeds
for each operation.
• The safe handling of the workpiece when cutting.
• The safe stacking of the workpiece before and after cutting.
• Connection of the optional power feed unit.
MAIN MOTOR
CAN START AND
OPERATE THIS
MACHINE ONLY
IF THE DOOR IS
COMPLETELY
CLOSED AND
SECURED.
LABEL NO. 1
LABEL NO. 2
LABEL NO. 3
LABEL NO. 4
LABEL NO. 5
LABEL NO. 6
LABEL NO. 7
LABEL NO. 8
