A
SSEMBLY
STAGE
#5
Attach Handlebar
Assembly Hardware Required:
#29
Hex Socket Screw
Qty. 1
#31
T-Knob Bushing
Qty. 1
#30
Flat Washer
Qty. 2
#32
Spring Washer
Qty. 2
Assembly Description:
A)
Position the
Handlebar Assembly
(#14) in the cradle mount of the
Mast Assm
(#11).
Place the
Handlebar Clamp
(#16) over the middle of the Handlebar Assembly. Secure the top of the clamp using 1-
Hex Socket Screw
(#29) and
2-
Flat Washers
(#30).
B)
Route the
Handlebar Assembly
/
Heart Rate Cable
through the elongated hole in the mast. Continue to route the
cable up through the middle of the computer mounting plate.(FIG#3)
C)
Push the
Handlebar Cover
(#15) over the clamp mounting area. Lock (snap) the cover in place by aligning the
edges with the groves on the plastic covers of the
Handlebar Assembly
(#14).
D)
Thread the
T-Knob
(#17), 1-
T-Knob Bushing
(#31) and 2–
Spring Washer
(#32) through the bottom hole of the
clamp mounting. Adjust the Handlebar to the desired user position and fully tightened the
T-Knob
(#17) to prevent
the handles from moving.
♦
Assembly Stage #5 completed
14
15
16
30
29
17
19
P
AGE
10
A
SSEMBLY
I
NSTRUCTION
32
31
H
ANDLEBAR
H
EART
R
ATE
C
ABLE
11
FIGURE #3
