7.3 Erase Normal Keys Mode
Touch the reader shortly twice with a Master key. The controller will emit a short beep
acknowledging the Master key. On second touch, the controller will emit two short beeps denoting
second Master key touch in programming mode. No later than 6 s after that, touch and hold the
Master key at the reader (long touch). On third touch, the controller will emit three short beeps and in
6 s, one beep denoting switch into Erase Normal Keys mode. Now take the Master key away from
the reader.
To erase Normal and Blocking keys, keep touching the reader with them, one by one, ensuring
that the interval between touches does not exceed 16 s.
On each touch, successful erasing a key will be acknowledged by a short beep; if a key did not
exist in memory, two beeps will follow.
To exit this mode, either wait 16 s after last key touch, or touch the reader with a Master key. The
controller will acknowledge exit from programming by four short beeps.
7.4 Erase All Memory Mode.
Touch the reader shortly three times with a Master key. The controller will emit a short beep
acknowledging the Master key. On second touch, the controller will emit two short beeps, denoting
the second Master key touch in programming mode. On third touch, the controller will emit three
short beeps denoting the third Master key touch. No later than 6 s after that, touch and hold the
Master key at the reader (long touch). On fourth touch, the controller will emit four short beeps, and
in 6s
a series of short beeps denoting controller memory erase and automatic exit from
programming mode.
Now you can take the Master key away from the reader.
Note:
When keys database is being erased via the Master key, the existing programmed Lock
Opening Time setting is not erased.
7.5 Set Lock Opening Time.
Touch the reader shortly four times with a Master key. On each touch, the controller will
acknowledge the Master key, emitting as many short beeps as the number of touch (one for first
touch, two for second etc.). On fourth touch, the controller will emit four short beeps and will switch
into Lock Opening Time programming mode.
No later than 6 s after that, please press and hold the door release button for the length of time
required for opening. When the door button is released, the controller will emit a beep and set the
time which the button was pressed, as the new door opening time.
For exact time programming, we recommend using the Web interface.
7.6 Accept Mode.
Use the Accept mode to store all keys touching the reader into memory. Any key touching the
reader will unlock the door and be stored into controller memory if it does not exist there yet.
This mode is used for controller keys database recovery without having to gather back all the
keys issued to users. A Master key is necessary to activate this mode.
Touch the reader shortly five times with a Master key. On each touch, the controller will
acknowledge the Master key, emitting as many short beeps as the number of touch (one for first
touch, two for second etc.). On fifth touch, the controller will emit five short beeps and in a few
seconds, a long beep, which acknowledges Accept mode activation.
To deactivate Accept mode, touch the reader with a Master key again; a series of short beeps will
acknowledge the exit from this mode.
Note:
If the supply power fails while Accept mode is active, it remains active after the power is
back on.
Z-5R Web
www.ironlogic.
me
page
19
