ironLogic Z-5R Web, Руководство пользователя

Страница: 18 / 21

7. SETTING UP CONTROLLER WITH A MASTER KEY.
To manage the controller with a Master key (i.e. to switch into required programming mode to
create or erase a Normal or Blocking card, activate Accept Mode, etc.), two types of Master key
touches are used. Short touch is less 1 s, and long touch is about 6 s. In all programming modes,
there is a timeout feature: in 16 s after the last key touch, the controller will leave the programming
mode, emitting four short beeps.
Note 1: The controller contains two keys databases; in Standalone mode, they are filled or
erased in parallel.
Note 2: To use Master key programming, connect your readers via iButton™ protocol.
The following programming modes are possible:
-
Add Normal Keys 1 long touch;
- Add Master Keys 1 short touch, 1 long touch;
- Erase Normal Key 2 short touches, 1 long touch;
- Erase All Memory 3 short touches, 1 long touch;
- Set Door Opening Time 4 short touches;
- Activate Accept Mode 5 short touches;
- Deactivate Accept Mode 1 short touch.
7.1 Add Normal Keys Mode.
Touch and hold the reader with a Master key. The controller will emit a short beep
acknowledging the Master key, and in 6 s, one more beep indicating that controller has switched
into Add Normal Key mode. Take the Master key away from the reader.
To add new Keys, keep touching the reader with them, one after another, ensuring that interval
between touches does not exceed 16 s. The reader will acknowledge each new touch by a short
beep.
Hold a new key at the reader for 3 s and more, for it to be written as a Blocking key (otherwise
Normal key).
If the presented key already exists in memory, the controller will emit two short beeps.
To exit this mode, either wait 16 s after last key touch, or touch the reader with a Master key. The
controller will acknowledge exit from programming by four short beeps.
7.2 Add Master Keys Mode
Touch the reader shortly with a Master key. The Controller will emit a short beep
acknowledging the Master key. No later than 6 s after that, touch and hold the Master key at the
reader. The controller will emit two short beeps denoting second Master key touch in programming
mode, and in 6 s, -- one beep denoting that controller switched into Add Master Keys mode. Now
take the Master key away from the reader.
To add new Master keys, keep touching the reader with them, one after another, ensuring that
interval between touches does not exceed 16 s. The reader will acknowledge each new touch by a
short beep, however if the presented key already exists in controller memory, there will be no
signals.
To exit this mode, wait 16 s after last key touch. The controller will acknowledge exit from
programming by four short beeps.
Z-5R Web
www.ironlogic. me
page 18