background image

3        

For more information, visit global.irobot.com

EN

Dual Mode Virtual Wall

®

 Barrier   

(compatible with all models) 

Use the Dual Mode Virtual Wall

®

 barrier to  

keep the robot in the places you want  

cleaned — and out of the ones you don’t. 

It creates an invisible barrier that only the  

robot can see. You can leave the device in  

position between cleanings. 

Choose the mode to meet your needs:

Virtual Wall Mode:

 

When the switch is in 

the Virtual Wall position ( 

), the device 

will create a linear barrier to block  

openings up to 10 feet (3 meters). 

Note: 

This barrier gets wider as it gets  

further from the device (refer to illustration). 

Accessories

10ft 

/ 3m

24in / 60 cm

Halo Mode:

 

Toggle the switch to the 

Halo position (

), to create a circular 

barrier. This will prevent the robot from 

approaching zones you want to protect 

such as a pet bowl, vase, or under a desk. 

The Halo barrier extends approximately 

24 inches (60 centimeters) from the  

center of the device.

•   You can use the Spot Clean feature to have the robot go after 

specific spills. Just place the robot in the center of the debris and 

press   (Spot Clean). The robot will clean the area by spiraling 

outward about 3 feet (1 meter) and then spiral inward to end 

where it started.

•   Keep the robot on the Home Base

®

 charging station so it’s always 

ready to clean when you need it. If you need to store the robot off 

of the charging station, turn off the battery by removing the robot 

from the Home Base charging station and holding down the 

     (Home) button for 9 seconds, all indicators will turn off and you 

will hear an audible tone, then store the robot in a cool, dry place. 

To wake the robot up and turn on the battery, plug in the Home 

Base charging station and place the robot on the  

charging station.

•   When the robot is charging, it will turn off the indicator lights  

to save energy. You can check the status by pressing the CLEAN 

button. The Battery Indicator icon will illuminate amber when  

the battery is charging, and green when the battery is fully 

charged.Battery charge status can also be viewed in the  

iRobot HOME App.

  

Note: 

After each use, empty the bin and clean the filter. 

Note: 

The batteries will last about 8-10 months under normal use. If you are not 

planning to use your Virtual Wall barrier for an extended period of time, be sure 

to turn the switch to the Off, or middle position.

Содержание Roomba e5













Отзывы: