IRIS IRIScan Pro 3 Wifi, Руководство пользователя

Страница: 71 / 85

7-4
Notes:
 If the calibration process failed, the red led flashes and [E19] is displayed on the
screen. Power off the scanner and repeat the calibration.
 To keep the calibration sheet feeding straight, slightly the top edge of the sheet when
the sheet begins to feed through.
Calibrate the Scanner in PC mode:
Alternatively, you may also follow these steps to calibrate the scanner in PC mode.
1. Follow step 1 to 5 as described above.
2. Switch to PC mode by pressing the “ SD/PC/Wifi ” button on the scanner until the LCD
screen shows “ PC ”.
3. Start Capture Tool by choosing Start>All Programs>IRIS IRIScan Pro Wifi
Scanner>Capture Tool.
4. Select “ IRIScan Pro Wifi ” as your scanner model. The main window of Capture Tool
will be displayed.
5. Choose the “ Setting ” tab and then the “ Calibration ” button.
6. The calibration card will be fed through and LCD screen shows “ Cal ”.
7. After the calibration process is finished, [ OK ] will be displayed on the screen.
Warning:
If the calibration process failed, the Red LED will be flashing and [ E19 ] will be displayed on
the screen. Power off the scanner and then repeat the calibration step again.
Warning:

Do not interrupt the calibration sequence or try to shut off the device while it is
calibrating. If you stop the calibration before it has completed, a calibration error may
occur. As a result, you will have to power off the unit and repeat the instructions in this
section.

Calibrate the scanner only when color of the scanned image looks abnormal.

Keep the calibration sheet from dust and debris. Any dirt may make the calibration chart
invalid or impact the calibration result.

Use only the included calibration sheet to calibrate the scanner.