iReliev PlayMakar, Инструкция по эксплуатации

Страница: 17 / 44

• Please recycle. Do not dispose of old batteries with your household waste; dispose of them safely at
your recycling center or business where the batteries were purchased.
STEP BY STEP OPERATION GUIDE FOR TREATMENT
Preparing Skin Before Using
Proper preparation of the skin covered by the electrode pads allows greater electrical dispersion for increased
stimulation to reach targeted tissues, prolongs electrode pad life, and reduces the risk of skin irritation. After
connecting the wireless units to the electrode pads, use the following steps to prepare your skin at the elec-
trode pad placement sites:
1. Determine the electrode pad placement sites for the electrode pads.
2. Wash the area with mild soap and water (do not use alcohol). Rinse and dry thoroughly.
3. Trim excess body hair from the area with scissors (do not shave).
4. Optionally, apply skin prep to the area to form a protective barrier on your skin. Apply, let dry, and affix
electrode pad as directed. This will both reduce the chance of skin irritation and may extend the life of
your electrode pads.
5. When removing electrode pads, always remove by pulling in the direction of hair growth.
6. It may be helpful to apply iReliev
®
after use skin lotion on electrode pad placement area when system
is not in use.
Placement of Electrode Pad
1. Place the electrode pad with the contact plugs up onto a
flat surface. Place the receiver pod with the contact jacks down
onto the electrode pad so that plugs and jacks are aligned.
Then press down until they are completely snapped in.
2. Do not remove the clear plastic shield from electrode pad
until the unit is ready to be placed on the body.
17 www.iReliev.com