IQ Vertiq 2306, Инструкция по эксплуатации

Страница: 1 / 17

Vertiq 2306
Instruction Manual
Warning: you must initialize your motor module through the IQ Control Center before use
1 Box Contents
ˆ
Motor module
ˆ
Power wires
ˆ
Communication wires
ˆ
Capacitor
ˆ
Propeller adapter
ˆ
Propeller adapter nut
ˆ
Propeller adapter screws
ˆ
Mounting screws
ˆ
Heat shrink
2 Module Assembly
ˆ
Solder power wires to the top part of the PCB
– Black wire to -
– Red wire to +
ˆ
Solder communication wires to bottom part of the PCB
– Black wire to -
– Red wire to PCB’s TX/Tel
– White wire to PCB’s RX/PWM
ˆ
Solder external capacitor on top of power wires*
– Cut capacitor leads down to desired size (rec: 8mm)
– Side with white marking to - (over black power wire)
– Side without marking to + (over red power wire)
ˆ
Put heat shrink over the wires and capacitor and apply heat
*optional, but suggested when applying more than 8V (2S battery)
2 MODULE ASSEMBLY
1/17 V1.1
©
2021 IQinetics Technologies Inc.