IQ Power Tools iQPC912VSK, Руководство оператора

Страница: 25 / 29

iQPC912VSK
Operator’s Manual
888-274-7744
www.iqpowertools.com
Remove & replace dust collection filter
REPLACING YOUR DUST COLLECTION FILTER:
- Remove fasteners from front filter cover plate.
- (A) Pull filter out through opening .
- Remove filter spin knob by turning counterclockwise
and remove filter cover from filter.
- Bag filter and dispose of it properly.
- Inspect and clean filter spindle.
TO REPLACE DUST COLLECTION FILTER CLEANING
TAB:
- (B) Remove single fastener at filter cleaning tab.
- Replace with new included tab.
- Adjust tab to engage filter pleats by 1/8” to 3/16” for
proper cleaning function.
REPLACING DUST COLLECTION FILTER BACK INTO
FILTER HOUSING:
- (C) Inspect filter seal for proper lubrication, apply IQ
filter seal lube as necessary.
- (D) Inspect bushing on filter cover plate and filter,
replace new bushing with those provided with filter
replacement kit.
MAINTENANCE & TROUBLE SHOOTING
- Install filter cover plate onto filter with bushings and
secure with filter spin knob.
- Insert open end of new filter into the open housing
and carefully work new filter seal onto filter spindle by
rotating filter back and forth until firmly seated.
- Lineup holes on filter cover plate and install fasteners.
- Spin newly installed filter and check for proper operation.