IPM IP-02S, Руководство по эксплуатации

Страница: 16 / 33

16
4.4 Attaching lower fluid assembly to the Air Motor assembly
The Piston Rod is actually inside the Air Motor assembly- which has been removed so you can
see more detail.
Notice how the Upper Connecting Rod is being inserted at an angle. This is to ensure that the
ball on the end correctly engages the slot or notch in the photo on the left.
You will need to “hook” the ball in to the slot by moving at an angle- and then press it towards
the center of the notch.
Note: the lower section will need to have the Piston Rod extended, and the Air Motor will need
to be in the down position in order for you to have enough length to hook these two
components together.
Connect the assembly to the lower section as shown.
You should now be ready to re-install the pump into your container. Attach the fluid hose first
and tighten before attaching the air line and turning the air supply back on.